Parts for well-drilling machinery tenders , Page 28

List of Tenders

Total: 472

• Die, BJ Clamping for Weatherford Iron Roughneck Model POWERARM 2.1 Positioning Device. • High Pressure Hose, 750 mm for Weatherford Iron Roughneck pn. 1763710. • Dies for Weatherford 24-50 auto door back up tong. • Brake band for Weatherford 7.6-30 tubing tong • Magnate for Weatherford 24-50 casing tong • 1" Hydraulic Hose 50 ft. long 3000 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing tong. • 1-¼" Hydraulic Hose 50 ft. long 600 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing Tong • 1" Aeroquip Wing type Union set. 3000 psi or above wp with 1" NPT (mal & female) connection. • 1-¼" Aeroquip Wing Type Union Set, 1000 psi or above wp with 1-¼" NPT(mal & female) connection. • 5" Drill Pipe Elevator Center Latch 350T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 3½" Drill Pipe Elevator Center Latch 250T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 2?" Drill Pipe Elevator Center Latch 100T with 18 degree tapered shoulders,safety double latch system to reduce accidental opening. • 5? DP Slips medium complete assembly 5? body with Inserts for 5? OD API Drill Pipe • 3½" DP Slips medium complete assembly 3 ½ inc body with Inserts for 3½ OD API Drill Pipe • 5? DP Slips Dies (5? body Varco) – 2167- 04 (180 Nos) • Bit sub 3-½ IF X 3-½ Reg. connection, Float Valve Bore in Reg. connection side. • X-O-S 3-½ IF Box X 3-½ Reg. pin connection • X-Over 4 1/2” IF box – 3 ½” IF pin • Bit sub 7 5/8 ” reg box – 7 5/8”reg box • Bit sub 6 5/8 ” reg box – 6 5/8”reg box with Float Valve Bore • Bit sub 4 ½” reg box – 4 ½” IF box, Float Valve Bore in Reg. connection side. • Light weight Lifting cap for 5 ?/ 4 ½ " Drill pipe, connection 4 1/2" IF • Lower Kelly Cock, 10000 psi wp, 6.62" OD × 3" ID , Length 22? High Torque Double Shoulder Compatible with API NC 50 (4 ½ IF) box up × pin down connection with metal to metal seal in ball seat and operating port complete with operating key. • 5"OD Threaded Cup Junk Sub / Boot Basket , Cup Length-30", 4-9/16" Cup ID, 1-1/2" Bore for operation in 6 to 6-3/8" Hole with 3-1/2" API Reg. Pin up × Box down connection. • 8-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 8-1/4"OD Taper Mill (30 degree angle), Dressed with Crushed insert tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Taper Mill (30 degree angle), Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 4-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 2-3/8" API Reg. Pin connection. Bowen or equivalent. • Foldable Runner Treadmill - 6.5HP Motor 0-22 Level Auto Incline 'Dual Shock 10-Point Absorption System: Now with 'Bluetooth' and The Perfect Running Area: 140 x 48cm (1400 x 480mm), 15.6" LCD Display, Auto Incline, Bluetooth, German made Soft Drop System. DISPLAY: Watch videos on large 10-15.6 inch LCD touch screen display with Wi-Fi | AUDIO: Listen to music on Hi Fi speakers using USB pendrive or audio-in jack | PROGRAMS: 12 preset workout programs & manual mode for customized cardio exercise | PROGRAMS -- There are 12 Pre-Set programs P1-P12 to choose different workouts and manual mode settings of Speed, Distance, Time, Calories & Pulse for customized workouts FOLDABLE: The machine can folded in upright position when not in use. Hydraulic assist system lets you easily lift & lower the treadmill deck Foldable treadmill with cushioned 'Dual Shock 10-Point Absorption System'. Quality assurance & zero defect production rates. Branx Fitness excels in product quality & reliability. Superb 21km/h Max Speed (13mph). CE/ROHS/EN957 & ISO9001 Quality Control Certified & up to GS Standard. Maximumspeed:21kmph • Crystal XP2i digital Pressure gauge (0-15000 psi rated) with Data logger software • HP Laptop Intel Core i7 11th gen GeForce MX450 2GB Graphics 15.6" FHD Anti-glare 1165G7 Processor (12M Cache, 2.80 to 4.70 GHz) 8GB Ram +1TB HDD, or upgrade . • Micromotion Coriolis Mass Flowmeter F300 series • Micromotion 2700 Multiple Variable Flow Transmitter with remote mounting • Micromotion Prolink III software • Nuflo Turbine 1502 Weco union liquid turbine meter or equivalent mounted on 2” cementing line with remote data acquisition system/software • 1502 Weco Hammer Union Pressure Transmitter- mounted on 2” cementing line (Rosemount/Viatran or equivalent, 0-15000 psi rated) with remote data acquisition ystem/software • For Cement Silo • 4” Butterfly Valve • 3” non-return Valve • 1” non-return valve • 4” discharge hose, 25-30 ft long c/w 4” opposite fig 100 hammer union male x female connection, WP= 150 psi • 3” air hose, 25-30 ft long c/w 3” opposite fig 100 hammer union male x female connection, WP= 150 psi • 1” rubber hose NPT connection 300 psi, 4 ft • 1” Tee • 1” socket • 1” nipple • 1” Air jet nipple with 1” aeration hose & 1” check valve

Publish Date: 18 Nov 2021

Closing Date: 29 Nov 2021

Country: Bangladesh

Tender Type: Invitation to Tender

Language: English

Переговоры с обеспечением выполнения претендентами (участниками переговоров) требований предварительного квалификационного отбора претендентов (участников переговоров), с проведением процедуры улучшения предложений для переговоров по выбору арендодателя бурового комплекса (буровая установка, установка для приготовления буровой смеси, установка по откачке раствора (илосос), 2 установки для водопонижения иглофильтрами, экскаватор) в количестве 1-ой единицы с экипажем, с предоставлением услуг по управлению и техническому обслуживанию бурового комплекса арендодателем, с перебазировкой бурового комплекса на объект, по объекту и с объекта арендодателем, с монтажом и демонтажом бурового комплекса, запуском в работу бурового комплекса арендодателем для выполнения строительно-монтажных и иных специальных монтажных работ по устройству сетей водоснабжения диаметром 160 мм ПЭ в количестве 889,0 мп и напорной хоз-бытовой канализации диаметром 2х110 мм ПЭ в количестве 2 830,0 мп в рамках (пределах) документации для переговоров на объекте: «Реконструкция жилой усадебной застройки д. Цна (инженерное обеспечение)». -- Negotiations to ensure that the bidders (negotiators) fulfill the requirements of the prequalification of bidders (negotiators), with the procedure for improving proposals for negotiations on the choice of the lessor of the drilling complex (drilling rig, rig for preparing drilling mixture, unit for pumping mud (sludge pump), 2 installations for dewatering with wellpoints, excavator) in the amount of 1 unit with a crew, with the provision of services for the management and maintenance of the drilling complex by the lessor, with the relocation of the drilling complex to the object, within the object and from the object by the lessor, with the installation and dismantling of the drilling complex,the commissioning of the drilling complex by the lessor for construction and installation and other special installation work on the arrangement of water supply networks with a diameter of 160 mm PE in the amount of 889.0 lm and a pressure household sewerage with a diameter of 2x110 mm PE in the amount of 2,830.0 lm within ( limits) documentation for negotiations at the facility: "Reconstruction of residential estate development in the village of Tsna (engineering support)".

Publish Date: 9 Nov 2021

Closing Date: 12 Nov 2021

Country: Belarus

Tender Type: Invitation to Tender

Language: Russian

на выполнение работ по ремонту системы водоснабжения (перебуривание скважин) -- to perform work on the repair of the water supply system (re-drilling of wells)

Publish Date: 25 Oct 2021

Closing Date: 1 Nov 2021

Country: Russia

Tender Type: Invitation to Tender

Language: Russian

Стол поворотный, тиски станочные -- Rotary table, machine vice

Publish Date: 18 Oct 2021

Closing Date: 22 Oct 2021

Country: Belarus

Tender Type: Invitation to Tender

Language: Russian

AMPLIACIÓN SISTEMA DE AGUA POTABLE PERFORACIÓN DE POZO ALDEA XEQUISTEL, SAN ANTONIO PALOPÓ, SOLOLÁ -- DRINKING WATER SYSTEM EXPANSION OF WELL DRILLING ALDEA XEQUISTEL, SAN ANTONIO PALOPÓ, SOLOLÁ

Publish Date: 14 Oct 2021

Closing Date:

Country: Guatemala

Tender Type: Invitation to Tender

Language: Spanish

CONSTRUCCIÓN POZO (S) MECÁNICO (PERFORACIÓN Y EQUIPAMIENTO), PARCELAMIENTO EL OVEJERO, EL PROGRESO, JUTIAPA. -- CONSTRUCTION OF MECHANICAL WELL (S) (DRILLING AND EQUIPMENT), EL OVEJERO PLOT, EL PROGRESO, JUTIAPA.

Publish Date: 14 Oct 2021

Closing Date:

Country: Guatemala

Tender Type: Invitation to Tender

Language: Spanish

IMPROVEMENT OF WATERWORKS SYSTEM(Well Drilling)

Publish Date: 13 Oct 2021

Closing Date: 21 Oct 2021

Country: Philippines

Tender Type: Invitation to Tender

Language: English

DEEP WELL DRILLING AND WATER SYSTEM SERVICES

Publish Date: 13 Oct 2021

Closing Date: 20 Oct 2021

Country: Philippines

Tender Type: Invitation to Tender

Language: English

Dostawa noży kombajnowych do organów urabiających dla Oddziałów Polskiej Grupy Górniczej S.A. – nr grupy 295-9 -- Industrial drill bits

Publish Date: 11 Oct 2021

Closing Date: 21 Oct 2021

Country: Poland

Tender Type: Invitation for Bids

Language: English

CONSTRUCCION SISTEMA DE AGUA POTABLE CON PERFORACION DE POZO CANTON CHUPOJ II, CHICHE, QUICHÉ -- CONSTRUCTION OF DRINKING WATER SYSTEM WITH WELL DRILLING CANTON CHUPOJ II, CHICHE, QUICHÉ

Publish Date: 11 Oct 2021

Closing Date:

Country: Guatemala

Tender Type: Invitation to Tender

Language: Spanish

Parts for well-drilling machinery tenders

Parts for well-drilling machinery Tenders 472

Filter

List of Tenders

info@biddingsource.com