• Die, BJ Clamping for Weatherford Iron Roughneck Model POWERARM 2.1 Positioning Device. • High Pressure Hose, 750 mm for Weatherford Iron Roughneck pn. 1763710. • Dies for Weatherford 24-50 auto door back up tong. • Brake band for Weatherford 7.6-30 tubing tong • Magnate for Weatherford 24-50 casing tong • 1" Hydraulic Hose 50 ft. long 3000 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing tong. • 1-¼" Hydraulic Hose 50 ft. long 600 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing Tong • 1" Aeroquip Wing type Union set. 3000 psi or above wp with 1" NPT (mal & female) connection. • 1-¼" Aeroquip Wing Type Union Set, 1000 psi or above wp with 1-¼" NPT(mal & female) connection. • 5" Drill Pipe Elevator Center Latch 350T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 3½" Drill Pipe Elevator Center Latch 250T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 2?" Drill Pipe Elevator Center Latch 100T with 18 degree tapered shoulders,safety double latch system to reduce accidental opening. • 5? DP Slips medium complete assembly 5? body with Inserts for 5? OD API Drill Pipe • 3½" DP Slips medium complete assembly 3 ½ inc body with Inserts for 3½ OD API Drill Pipe • 5? DP Slips Dies (5? body Varco) – 2167- 04 (180 Nos) • Bit sub 3-½ IF X 3-½ Reg. connection, Float Valve Bore in Reg. connection side. • X-O-S 3-½ IF Box X 3-½ Reg. pin connection • X-Over 4 1/2” IF box – 3 ½” IF pin • Bit sub 7 5/8 ” reg box – 7 5/8”reg box • Bit sub 6 5/8 ” reg box – 6 5/8”reg box with Float Valve Bore • Bit sub 4 ½” reg box – 4 ½” IF box, Float Valve Bore in Reg. connection side. • Light weight Lifting cap for 5 ?/ 4 ½ " Drill pipe, connection 4 1/2" IF • Lower Kelly Cock, 10000 psi wp, 6.62" OD × 3" ID , Length 22? High Torque Double Shoulder Compatible with API NC 50 (4 ½ IF) box up × pin down connection with metal to metal seal in ball seat and operating port complete with operating key. • 5"OD Threaded Cup Junk Sub / Boot Basket , Cup Length-30", 4-9/16" Cup ID, 1-1/2" Bore for operation in 6 to 6-3/8" Hole with 3-1/2" API Reg. Pin up × Box down connection. • 8-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 8-1/4"OD Taper Mill (30 degree angle), Dressed with Crushed insert tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Taper Mill (30 degree angle), Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 4-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 2-3/8" API Reg. Pin connection. Bowen or equivalent. • Foldable Runner Treadmill - 6.5HP Motor 0-22 Level Auto Incline 'Dual Shock 10-Point Absorption System: Now with 'Bluetooth' and The Perfect Running Area: 140 x 48cm (1400 x 480mm), 15.6" LCD Display, Auto Incline, Bluetooth, German made Soft Drop System. DISPLAY: Watch videos on large 10-15.6 inch LCD touch screen display with Wi-Fi | AUDIO: Listen to music on Hi Fi speakers using USB pendrive or audio-in jack | PROGRAMS: 12 preset workout programs & manual mode for customized cardio exercise | PROGRAMS -- There are 12 Pre-Set programs P1-P12 to choose different workouts and manual mode settings of Speed, Distance, Time, Calories & Pulse for customized workouts FOLDABLE: The machine can folded in upright position when not in use. Hydraulic assist system lets you easily lift & lower the treadmill deck Foldable treadmill with cushioned 'Dual Shock 10-Point Absorption System'. Quality assurance & zero defect production rates. Branx Fitness excels in product quality & reliability. Superb 21km/h Max Speed (13mph). CE/ROHS/EN957 & ISO9001 Quality Control Certified & up to GS Standard. Maximumspeed:21kmph • Crystal XP2i digital Pressure gauge (0-15000 psi rated) with Data logger software • HP Laptop Intel Core i7 11th gen GeForce MX450 2GB Graphics 15.6" FHD Anti-glare 1165G7 Processor (12M Cache, 2.80 to 4.70 GHz) 8GB Ram +1TB HDD, or upgrade . • Micromotion Coriolis Mass Flowmeter F300 series • Micromotion 2700 Multiple Variable Flow Transmitter with remote mounting • Micromotion Prolink III software • Nuflo Turbine 1502 Weco union liquid turbine meter or equivalent mounted on 2” cementing line with remote data acquisition system/software • 1502 Weco Hammer Union Pressure Transmitter- mounted on 2” cementing line (Rosemount/Viatran or equivalent, 0-15000 psi rated) with remote data acquisition ystem/software • For Cement Silo • 4” Butterfly Valve • 3” non-return Valve • 1” non-return valve • 4” discharge hose, 25-30 ft long c/w 4” opposite fig 100 hammer union male x female connection, WP= 150 psi • 3” air hose, 25-30 ft long c/w 3” opposite fig 100 hammer union male x female connection, WP= 150 psi • 1” rubber hose NPT connection 300 psi, 4 ft • 1” Tee • 1” socket • 1” nipple • 1” Air jet nipple with 1” aeration hose & 1” check valve

World Biggest Tenders Source

This tender with title • Die, BJ Clamping for Weatherford Iron Roughneck Model POWERARM 2.1 Positioning Device. • High Pressure Hose, 750 mm for Weatherford Iron Roughneck pn. 1763710. • Dies for Weatherford 24-50 auto door back up tong. • Brake band for Weatherford 7.6-30 tubing tong • Magnate for Weatherford 24-50 casing tong • 1" Hydraulic Hose 50 ft. long 3000 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing tong. • 1-¼" Hydraulic Hose 50 ft. long 600 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing Tong • 1" Aeroquip Wing type Union set. 3000 psi or above wp with 1" NPT (mal & female) connection. • 1-¼" Aeroquip Wing Type Union Set, 1000 psi or above wp with 1-¼" NPT(mal & female) connection. • 5" Drill Pipe Elevator Center Latch 350T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 3½" Drill Pipe Elevator Center Latch 250T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 2?" Drill Pipe Elevator Center Latch 100T with 18 degree tapered shoulders,safety double latch system to reduce accidental opening. • 5? DP Slips medium complete assembly 5? body with Inserts for 5? OD API Drill Pipe • 3½" DP Slips medium complete assembly 3 ½ inc body with Inserts for 3½ OD API Drill Pipe • 5? DP Slips Dies (5? body Varco) – 2167- 04 (180 Nos) • Bit sub 3-½ IF X 3-½ Reg. connection, Float Valve Bore in Reg. connection side. • X-O-S 3-½ IF Box X 3-½ Reg. pin connection • X-Over 4 1/2” IF box – 3 ½” IF pin • Bit sub 7 5/8 ” reg box – 7 5/8”reg box • Bit sub 6 5/8 ” reg box – 6 5/8”reg box with Float Valve Bore • Bit sub 4 ½” reg box – 4 ½” IF box, Float Valve Bore in Reg. connection side. • Light weight Lifting cap for 5 ?/ 4 ½ " Drill pipe, connection 4 1/2" IF • Lower Kelly Cock, 10000 psi wp, 6.62" OD × 3" ID , Length 22? High Torque Double Shoulder Compatible with API NC 50 (4 ½ IF) box up × pin down connection with metal to metal seal in ball seat and operating port complete with operating key. • 5"OD Threaded Cup Junk Sub / Boot Basket , Cup Length-30", 4-9/16" Cup ID, 1-1/2" Bore for operation in 6 to 6-3/8" Hole with 3-1/2" API Reg. Pin up × Box down connection. • 8-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 8-1/4"OD Taper Mill (30 degree angle), Dressed with Crushed insert tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Taper Mill (30 degree angle), Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 4-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 2-3/8" API Reg. Pin connection. Bowen or equivalent. • Foldable Runner Treadmill - 6.5HP Motor 0-22 Level Auto Incline 'Dual Shock 10-Point Absorption System: Now with 'Bluetooth' and The Perfect Running Area: 140 x 48cm (1400 x 480mm), 15.6" LCD Display, Auto Incline, Bluetooth, German made Soft Drop System. DISPLAY: Watch videos on large 10-15.6 inch LCD touch screen display with Wi-Fi | AUDIO: Listen to music on Hi Fi speakers using USB pendrive or audio-in jack | PROGRAMS: 12 preset workout programs & manual mode for customized cardio exercise | PROGRAMS -- There are 12 Pre-Set programs P1-P12 to choose different workouts and manual mode settings of Speed, Distance, Time, Calories & Pulse for customized workouts FOLDABLE: The machine can folded in upright position when not in use. Hydraulic assist system lets you easily lift & lower the treadmill deck Foldable treadmill with cushioned 'Dual Shock 10-Point Absorption System'. Quality assurance & zero defect production rates. Branx Fitness excels in product quality & reliability. Superb 21km/h Max Speed (13mph). CE/ROHS/EN957 & ISO9001 Quality Control Certified & up to GS Standard. Maximumspeed:21kmph • Crystal XP2i digital Pressure gauge (0-15000 psi rated) with Data logger software • HP Laptop Intel Core i7 11th gen GeForce MX450 2GB Graphics 15.6" FHD Anti-glare 1165G7 Processor (12M Cache, 2.80 to 4.70 GHz) 8GB Ram +1TB HDD, or upgrade . • Micromotion Coriolis Mass Flowmeter F300 series • Micromotion 2700 Multiple Variable Flow Transmitter with remote mounting • Micromotion Prolink III software • Nuflo Turbine 1502 Weco union liquid turbine meter or equivalent mounted on 2” cementing line with remote data acquisition system/software • 1502 Weco Hammer Union Pressure Transmitter- mounted on 2” cementing line (Rosemount/Viatran or equivalent, 0-15000 psi rated) with remote data acquisition ystem/software • For Cement Silo • 4” Butterfly Valve • 3” non-return Valve • 1” non-return valve • 4” discharge hose, 25-30 ft long c/w 4” opposite fig 100 hammer union male x female connection, WP= 150 psi • 3” air hose, 25-30 ft long c/w 3” opposite fig 100 hammer union male x female connection, WP= 150 psi • 1” rubber hose NPT connection 300 psi, 4 ft • 1” Tee • 1” socket • 1” nipple • 1” Air jet nipple with 1” aeration hose & 1” check valve has been published on Bidding Source portal dated 18 Nov 2021 for the country of Bangladesh. It has been categorized on Installation of doors & Treadmills & Data equipment & Pipes & Speakers & Doors & Motion picture and video tape production and related services & Lighting equipment and electric lamps & Casing & Television and audio-visual equipment & Casing and tubing & Check valves & Video equipment & Non-return valves & Audio equipment accessories & Touch screen monitors & Seats & Turbine works & Portable computers & Computer-related equipment & Industrial quality control services & Tubing & Oil platform equipment & Plugs and sockets & Tungsten & Drill bits & Parts of lifting and handling equipment & Tungsten halogen filament lamps & Cement & Cushions & Oil drilling equipment & Pressure gauges & Control, safety or signalling equipment for port installations & Farming, hunting and fishing products & Meters & Butterfly valves & Jacks and vehicle hoists & Installation of doors and windows & Cementing work & Data-acquisition system & Lifting and handling equipment and parts & Lifting and handling equipment & Firefighting, rescue and safety equipment & Oil-field machinery & Audio-visual equipment & Hoses & Rubber boots & Software package and information systems & Brakes and brake parts & Hammers & Turbines and motors & Flowmeters & Iron roughnecks & Safety equipment & Casings & Installation of port lighting equipment & Elevators and conveyors & Silos & Door screens & Turbine installations & Installation of doors and windows and related components & Drilling equipment. For similar tenders you can see tenders mentioned below of this page.

General Information

Bangladesh

Tender Title :

• Die, BJ Clamping for Weatherford Iron Roughneck Model POWERARM 2.1 Positioning Device. • High Pressure Hose, 750 mm for Weatherford Iron Roughneck pn. 1763710. • Dies for Weatherford 24-50 auto door back up tong. • Brake band for Weatherford 7.6-30 tubing tong • Magnate for Weatherford 24-50 casing tong • 1" Hydraulic Hose 50 ft. long 3000 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing tong. • 1-¼" Hydraulic Hose 50 ft. long 600 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing Tong • 1" Aeroquip Wing type Union set. 3000 psi or above wp with 1" NPT (mal & female) connection. • 1-¼" Aeroquip Wing Type Union Set, 1000 psi or above wp with 1-¼" NPT(mal & female) connection. • 5" Drill Pipe Elevator Center Latch 350T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 3½" Drill Pipe Elevator Center Latch 250T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 2?" Drill Pipe Elevator Center Latch 100T with 18 degree tapered shoulders,safety double latch system to reduce accidental opening. • 5? DP Slips medium complete assembly 5? body with Inserts for 5? OD API Drill Pipe • 3½" DP Slips medium complete assembly 3 ½ inc body with Inserts for 3½ OD API Drill Pipe • 5? DP Slips Dies (5? body Varco) – 2167- 04 (180 Nos) • Bit sub 3-½ IF X 3-½ Reg. connection, Float Valve Bore in Reg. connection side. • X-O-S 3-½ IF Box X 3-½ Reg. pin connection • X-Over 4 1/2” IF box – 3 ½” IF pin • Bit sub 7 5/8 ” reg box – 7 5/8”reg box • Bit sub 6 5/8 ” reg box – 6 5/8”reg box with Float Valve Bore • Bit sub 4 ½” reg box – 4 ½” IF box, Float Valve Bore in Reg. connection side. • Light weight Lifting cap for 5 ?/ 4 ½ " Drill pipe, connection 4 1/2" IF • Lower Kelly Cock, 10000 psi wp, 6.62" OD × 3" ID , Length 22? High Torque Double Shoulder Compatible with API NC 50 (4 ½ IF) box up × pin down connection with metal to metal seal in ball seat and operating port complete with operating key. • 5"OD Threaded Cup Junk Sub / Boot Basket , Cup Length-30", 4-9/16" Cup ID, 1-1/2" Bore for operation in 6 to 6-3/8" Hole with 3-1/2" API Reg. Pin up × Box down connection. • 8-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 8-1/4"OD Taper Mill (30 degree angle), Dressed with Crushed insert tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Taper Mill (30 degree angle), Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 4-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 2-3/8" API Reg. Pin connection. Bowen or equivalent. • Foldable Runner Treadmill - 6.5HP Motor 0-22 Level Auto Incline 'Dual Shock 10-Point Absorption System: Now with 'Bluetooth' and The Perfect Running Area: 140 x 48cm (1400 x 480mm), 15.6" LCD Display, Auto Incline, Bluetooth, German made Soft Drop System. DISPLAY: Watch videos on large 10-15.6 inch LCD touch screen display with Wi-Fi | AUDIO: Listen to music on Hi Fi speakers using USB pendrive or audio-in jack | PROGRAMS: 12 preset workout programs & manual mode for customized cardio exercise | PROGRAMS -- There are 12 Pre-Set programs P1-P12 to choose different workouts and manual mode settings of Speed, Distance, Time, Calories & Pulse for customized workouts FOLDABLE: The machine can folded in upright position when not in use. Hydraulic assist system lets you easily lift & lower the treadmill deck Foldable treadmill with cushioned 'Dual Shock 10-Point Absorption System'. Quality assurance & zero defect production rates. Branx Fitness excels in product quality & reliability. Superb 21km/h Max Speed (13mph). CE/ROHS/EN957 & ISO9001 Quality Control Certified & up to GS Standard. Maximumspeed:21kmph • Crystal XP2i digital Pressure gauge (0-15000 psi rated) with Data logger software • HP Laptop Intel Core i7 11th gen GeForce MX450 2GB Graphics 15.6" FHD Anti-glare 1165G7 Processor (12M Cache, 2.80 to 4.70 GHz) 8GB Ram +1TB HDD, or upgrade . • Micromotion Coriolis Mass Flowmeter F300 series • Micromotion 2700 Multiple Variable Flow Transmitter with remote mounting • Micromotion Prolink III software • Nuflo Turbine 1502 Weco union liquid turbine meter or equivalent mounted on 2” cementing line with remote data acquisition system/software • 1502 Weco Hammer Union Pressure Transmitter- mounted on 2” cementing line (Rosemount/Viatran or equivalent, 0-15000 psi rated) with remote data acquisition ystem/software • For Cement Silo • 4” Butterfly Valve • 3” non-return Valve • 1” non-return valve • 4” discharge hose, 25-30 ft long c/w 4” opposite fig 100 hammer union male x female connection, WP= 150 psi • 3” air hose, 25-30 ft long c/w 3” opposite fig 100 hammer union male x female connection, WP= 150 psi • 1” rubber hose NPT connection 300 psi, 4 ft • 1” Tee • 1” socket • 1” nipple • 1” Air jet nipple with 1” aeration hose & 1” check valve

Tender Type :

Invitation to Tender

Reference No. :

BAPEX/ADMIN/INT/TEN-1056/2021

Country :

Bangladesh

Publish Date :

18 Nov 2021

Closing Date :

29 Nov 2021

Notice Language :

English

Tender Categories (CPVs) :

Installation of doors , Treadmills , Data equipment , Pipes , Speakers , Doors , Motion picture and video tape production and related services , Lighting equipment and electric lamps , Casing , Television and audio-visual equipment , Casing and tubing , Check valves , Video equipment , Non-return valves , Audio equipment accessories , Touch screen monitors , Seats , Turbine works , Portable computers , Computer-related equipment , Industrial quality control services , Tubing , Oil platform equipment , Plugs and sockets , Tungsten , Drill bits , Parts of lifting and handling equipment , Tungsten halogen filament lamps , Cement , Cushions , Oil drilling equipment , Pressure gauges , Control, safety or signalling equipment for port installations , Farming, hunting and fishing products , Meters , Butterfly valves , Jacks and vehicle hoists , Installation of doors and windows , Cementing work , Data-acquisition system , Lifting and handling equipment and parts , Lifting and handling equipment , Firefighting, rescue and safety equipment , Oil-field machinery , Audio-visual equipment , Hoses , Rubber boots , Software package and information systems , Brakes and brake parts , Hammers , Turbines and motors , Flowmeters , Iron roughnecks , Safety equipment , Casings , Installation of port lighting equipment , Elevators and conveyors , Silos , Door screens , Turbine installations , Installation of doors and windows and related components , Drilling equipment

Full Tender Details :

For viewing full details of tenders, you should Log in to your account. If not registered yet, Please Register Now

Or Request a call back now and one of our representatives will contact you. Contact us

Similar Tenders

Butterfly Valve without Actuator - 06 (Six) items. - LP-0036/IM/MTS/EIP/0213 Bangladesh Buying of LED Shoulder Light - 44.01.0000.453.07.431.24/25 Bangladesh Manufacturing, Supply & Installation of 1 (One) no. Pedestal type lifting device, Repair, Maintenance & Re-installation of 4 (Four) nos. M.S. Vertical Lift Gate (Size: 1.65m x 1.875m) & 3 (T… - XEN/BMD/OTM-04/139 Bangladesh Procurement of 14(fourteen) item of spare part for the different cargo handling Equipment of Chittagong Port Authority. - 18.13.0000.424.07.091.24 Bangladesh Procurement of Different type switch, socket and other necessary electrical goods under SSAE/IC/TL shop SDP. - BR/GR/16 Bangladesh Repair and Maintenance of 122(One Hundred and Twenty Two)components for different cargo handling equipment of Chittagong Port Authority with supply of required spares/Materials. - 18.13.0000.424.07.082.24 Bangladesh Repair, Maintenance and Fabrication works of 36(Thirty Six) items/components for different cargo handling equipment Chittagong Port Authority with supply with required spares/materials. - 18.13.0000.424.07.026.24 Bangladesh Supply, Fitting & Fixing of Street Light Pole, Bracket, Light Fixture etc. and Other Indoor Electrical Goods / Equipements for Repair & Maintenance Work at Emergency Basis (Term Contract) du… - 46.207.014.21.32.105.2024 Bangladesh Supplying of the following Hardware items :(i) Handle Lock (ii) Mortice door lock (iii) Hanging Lock (iv) Hydraulic door closer (v) Hasp Bolt (vi) Various sizes chitkeny (vii) Various sizes … - 27.11.0000.505.15.001.2024-2025.52 Bangladesh Procurement of 29(Twenty nine) item of spare part for different cargo handling Equipment of Chittagong Port Authority. - 18.13.0000.424.07.059.24 Bangladesh

info@biddingsource.com

24 X 7 online support