Taps, cocks and valves tenders , Page 253

List of Tenders

Total: 4914

• Die, BJ Clamping for Weatherford Iron Roughneck Model POWERARM 2.1 Positioning Device. • High Pressure Hose, 750 mm for Weatherford Iron Roughneck pn. 1763710. • Dies for Weatherford 24-50 auto door back up tong. • Brake band for Weatherford 7.6-30 tubing tong • Magnate for Weatherford 24-50 casing tong • 1" Hydraulic Hose 50 ft. long 3000 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing tong. • 1-¼" Hydraulic Hose 50 ft. long 600 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing Tong • 1" Aeroquip Wing type Union set. 3000 psi or above wp with 1" NPT (mal & female) connection. • 1-¼" Aeroquip Wing Type Union Set, 1000 psi or above wp with 1-¼" NPT(mal & female) connection. • 5" Drill Pipe Elevator Center Latch 350T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 3½" Drill Pipe Elevator Center Latch 250T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. • 2?" Drill Pipe Elevator Center Latch 100T with 18 degree tapered shoulders,safety double latch system to reduce accidental opening. • 5? DP Slips medium complete assembly 5? body with Inserts for 5? OD API Drill Pipe • 3½" DP Slips medium complete assembly 3 ½ inc body with Inserts for 3½ OD API Drill Pipe • 5? DP Slips Dies (5? body Varco) – 2167- 04 (180 Nos) • Bit sub 3-½ IF X 3-½ Reg. connection, Float Valve Bore in Reg. connection side. • X-O-S 3-½ IF Box X 3-½ Reg. pin connection • X-Over 4 1/2” IF box – 3 ½” IF pin • Bit sub 7 5/8 ” reg box – 7 5/8”reg box • Bit sub 6 5/8 ” reg box – 6 5/8”reg box with Float Valve Bore • Bit sub 4 ½” reg box – 4 ½” IF box, Float Valve Bore in Reg. connection side. • Light weight Lifting cap for 5 ?/ 4 ½ " Drill pipe, connection 4 1/2" IF • Lower Kelly Cock, 10000 psi wp, 6.62" OD × 3" ID , Length 22? High Torque Double Shoulder Compatible with API NC 50 (4 ½ IF) box up × pin down connection with metal to metal seal in ball seat and operating port complete with operating key. • 5"OD Threaded Cup Junk Sub / Boot Basket , Cup Length-30", 4-9/16" Cup ID, 1-1/2" Bore for operation in 6 to 6-3/8" Hole with 3-1/2" API Reg. Pin up × Box down connection. • 8-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 8-1/4"OD Taper Mill (30 degree angle), Dressed with Crushed insert tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 5-3/4"OD Taper Mill (30 degree angle), Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. • 4-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 2-3/8" API Reg. Pin connection. Bowen or equivalent. • Foldable Runner Treadmill - 6.5HP Motor 0-22 Level Auto Incline 'Dual Shock 10-Point Absorption System: Now with 'Bluetooth' and The Perfect Running Area: 140 x 48cm (1400 x 480mm), 15.6" LCD Display, Auto Incline, Bluetooth, German made Soft Drop System. DISPLAY: Watch videos on large 10-15.6 inch LCD touch screen display with Wi-Fi | AUDIO: Listen to music on Hi Fi speakers using USB pendrive or audio-in jack | PROGRAMS: 12 preset workout programs & manual mode for customized cardio exercise | PROGRAMS -- There are 12 Pre-Set programs P1-P12 to choose different workouts and manual mode settings of Speed, Distance, Time, Calories & Pulse for customized workouts FOLDABLE: The machine can folded in upright position when not in use. Hydraulic assist system lets you easily lift & lower the treadmill deck Foldable treadmill with cushioned 'Dual Shock 10-Point Absorption System'. Quality assurance & zero defect production rates. Branx Fitness excels in product quality & reliability. Superb 21km/h Max Speed (13mph). CE/ROHS/EN957 & ISO9001 Quality Control Certified & up to GS Standard. Maximumspeed:21kmph • Crystal XP2i digital Pressure gauge (0-15000 psi rated) with Data logger software • HP Laptop Intel Core i7 11th gen GeForce MX450 2GB Graphics 15.6" FHD Anti-glare 1165G7 Processor (12M Cache, 2.80 to 4.70 GHz) 8GB Ram +1TB HDD, or upgrade . • Micromotion Coriolis Mass Flowmeter F300 series • Micromotion 2700 Multiple Variable Flow Transmitter with remote mounting • Micromotion Prolink III software • Nuflo Turbine 1502 Weco union liquid turbine meter or equivalent mounted on 2” cementing line with remote data acquisition system/software • 1502 Weco Hammer Union Pressure Transmitter- mounted on 2” cementing line (Rosemount/Viatran or equivalent, 0-15000 psi rated) with remote data acquisition ystem/software • For Cement Silo • 4” Butterfly Valve • 3” non-return Valve • 1” non-return valve • 4” discharge hose, 25-30 ft long c/w 4” opposite fig 100 hammer union male x female connection, WP= 150 psi • 3” air hose, 25-30 ft long c/w 3” opposite fig 100 hammer union male x female connection, WP= 150 psi • 1” rubber hose NPT connection 300 psi, 4 ft • 1” Tee • 1” socket • 1” nipple • 1” Air jet nipple with 1” aeration hose & 1” check valve

Publish Date: 18 Nov 2021

Closing Date: 29 Nov 2021

Country: Bangladesh

Tender Type: Invitation to Tender

Language: English

LOT-1 : Spare of DW, HPU, Pneumatic system & others A) Pneumatic system • 2-P 3-W Normally closed pneumatic control valve NPT1½” • 3 in 1 air supply treatment device B) DrawWorks (HongHua Model: JC70DB) • Gear oil pump coupled with motor 1.5 KW (Explosion proof) • Hydraulic disc braking device (4 normally open calipers+4 normally closed calipers) • Fast air release valve • ventilated type air tube clutch set • Quick exhaust valve • Primary Oil Filter • Secondary Oil Filter • DW Kick back roller/ Rope Retainer C) Spare for main HPU (HongHua Model: ZY064B) • Return oil filter • HP oil filter • Relay valve HP filter • Air filter • Hydraulic Pump coupled with motor (YBK2-315s-6), 75KW, 400V, 3P, 50Hz, • Oil circulating pump coupled with motor (YB290s-4WF2) • DW disc brake hydraulic pump coupled with motor (YB2-100L2-4WF2, 3KW) • Bladder for accumulator for DW disc brake system • C-bite type hose-32I-2000 (90° single bent) • C-bite type hose-32I-1500 (90° single bent) Lot-2 : Mud system spares A) High Pressure Mud Circulating system • 4” Flanged flexil gate valve (flange to flange approx. length 55cm) API standard • 2” Flanged flexil gate valve (flange to flange approx. length 36.5cm) API standard • Repair Kit for above 4” Gate Valve including Gate, Seat, Bush, Metal Ring, O-ring etc. • Repair Kit for above 2” Gate Valve including Gate, Seat, Bush, Metal Ring, O-ring etc. • Gasket ring (metal) • Gasket ring (metal) • TRIP HOSE1:DN80 L=2600 with hammer unions • TRIP HOSE2:DN80 L=2200 with hammer unions • Mud hose 4” with one end male union Fig.1003 and other end flange 4 1/16”, 4.5m • Mud hose 4” with male female union connections • Mud hose 2” with Fig 1502 male female union connection • Rotary mud hose (male female hammer union connections) B) Solid Control circulating system • Wafer type single clamp Butterfly valve (medium pressure) API standard • Wafer type single clamp Butterfly valve (medium pressure) API standard • Wafer type single clamp Butterfly valve (medium pressure) API standard • Wafer type single clamp Butterfly valve (medium pressure) API standard • Wafer type single clamp Butterfly valve (medium pressure) API standard • Wafer type single clamp Butterfly valve (medium pressure) API standard D) Centrifugal pump XBSY SB 6x8 JC- 12 ½ 55kw • Impeller 12 1/2" (for above pump set) • Pump set coupled with motor 55 kw 3P 50Hz 400V E) Centrifugal pump XBSY SB 6x8 FJC- 12 ½ 55kw • Impeller 12 1/2" (for above pump set) • Pump set coupled with motor 55 kw 3P 50Hz 400V F) Centrifugal pump XBSY SB 2”×3” JC-10 15kw • Packing gland set • pump XBSY SB 2”×3” JC-10 with motor coupled 15kw 3P 50Hz 400V G) Centrifugal pump XBSY SB 3×4 JC-9 ½ 11kw • pump XBSY SB 3×4 JC-9 ½ with motor 11kw 3P 50Hz 400V coupled H) Centrifugal pump XBSY SB 5×6 FJ-12 ½ 45kw • Pump XBSY SB 5x6 FJ-12 1/2 coupled with 45kw 3P 50Hz 400V motor I) Spare for Diesel Tank JCYG11.00 • Diesel pump coupled with motor 5 HP , 50Hz (YB2-132S-4/5.5kw) • Fuel delivery hose 1 ½" , 20’ long, 300 psi (NPT connection) • Fuel Return hose 2 ", 20’ long, 300 psi (NPT connection) J) Mud Mixing Hopper system ZHP150 (XBSY) • Centrifugal Pump set coupled with AC motor 55 kw K) Miscellaneous • Hydraulic Jack with hydraulic pump complete set, min. 150 Ton capacity (for rig centering purpose) LOT-3 : Spare parts for Canrig top drive, Model: 1250AC 681, Sl.# 770 • Wash pipe Assy. 3.00 bore, washpipe • Wash pipe, 3in bore,7.5k or 5k • Packing, 3in • Filter element • Filter low press. 10 Micron, SAE12 • Gripper die • Air filter 250 psi max working pressure • LWCV assy., LT, NC 50 Box X NC 50 pin, 22 LG (manual) • LWCV, 6 5/8, Reg Box X NC50, 33 LG, Dual • Lube pump • Hydraulic motor • Hydraulic Pump coupled with motor 20HP, 230/460V,50Hz

Publish Date: 18 Nov 2021

Closing Date: 28 Nov 2021

Country: Bangladesh

Tender Type: Invitation to Tender

Language: English

Misc Items Valves & Non-return Valves.. 0041/HVN/LP/52

Publish Date: 16 Nov 2021

Closing Date: 30 Nov 2021

Country: Pakistan

Tender Type: Invitation to Tender

Language: English

Réparation Et Entretien Des Hydrants Sur Le Secteur Ouest De La Capi - Accord-cadre à bons de commande 2022- 2024 -- Repair And Maintenance Of Hydrants In The Western Sector Of La Capi - Framework Agreement With Purchase Orders 2022-2024

Publish Date: 16 Nov 2021

Closing Date:

Country: France

Tender Type: Invitation for Bids

Language: French

Construction - INSTALLATION OF BACKUP GENERATORS, FLOW CONTROL VALVE AND ASSOCIATED INFRASTRUCTURE DURNACOL, CHELMSFORD AND BRAAKFONTEIN M&E UPGRADE

Publish Date: 12 Nov 2021

Closing Date: 10 Dec 2021

Country: South Africa

Tender Type: Invitation for Bids

Language: English

Online Safety Valves Testing

Publish Date: 12 Nov 2021

Closing Date: 21 Nov 2021

Country: Qatar

Tender Type: Invitation for Bids

Language: English

Plug Valves Qty. 02 Items (05 Nos.) SNT-2076/21

Publish Date: 11 Nov 2021

Closing Date: 17 Dec 2021

Country: Pakistan

Tender Type: Invitation to Tender

Language: English

Regulators & Diaphragm Qty. 04 Items (55 Nos.) SNC-1859/21

Publish Date: 11 Nov 2021

Closing Date: 15 Dec 2021

Country: Pakistan

Tender Type: Invitation to Tender

Language: English

Regulators & Diaphragm Qty. 04 Items (55 Nos.) SNC-1859/21

Publish Date: 11 Nov 2021

Closing Date: 15 Dec 2021

Country: Pakistan

Tender Type: Invitation to Tender

Language: English

Ball Valves Qty. 08 Nos. SN-4307/21

Publish Date: 11 Nov 2021

Closing Date: 30 Nov 2021

Country: Pakistan

Tender Type: Invitation to Tender

Language: English

Taps, cocks and valves tenders

Taps, cocks and valves Tenders 5104

Filter

List of Tenders

info@biddingsource.com