DDM/Tent/Dhaka/2022-2023/01 Tent Specification: 1. Composition: Outer Tent: High Strength 100% Polyester Woven Fabric,1000D x 1000D; (coated). Inner Tent: Super Strong Poly-Cotton (Polyester/Cotton blended fibers yarns). Cotton: 30% (±10), polyester: 70%(±10) Specific weight: 900 g/m2 minimum(outer tent); 320 g/m2 minimum(inner tent) Ground Sheet : Polyester PVC coated (100% waterproof) 2. Water vapor absorption: (Inner tent) Minimum 2000 g/ m²//24h. ISO 17229 3. Tensile strength (N) : Warp and Weft Minimum 1000(N) (Outer tent) Warp and Weft Minimum 850(N) (Inner tent) ISO-13934-1. 4. Rain penetration resistance/ water repellency/ spray test: (Outer & inner tent) Resistance to rain as per point 4.2.11 applying procedure as per 5.6 during 2h on one end and 3h on one side. 5. Frame: The metal structure of tent should be not less then 25mm in diameter, Thickness is not less than 0.8 mm 6. Fire Resistance/ retardancy: (Outer & inner tent) Should comply with CPAI-84, 1980 7. Tear resistance(N): Warp and weft 60N minimum (inner tent), Warp and weft 100N minimum (outer tent) ISO 9073-4 8. Size I) 10 Persons-4m x 3.6m x 2.2m (CH) x 1.7m (Wall Height) minimum 9. Tent Inner Ceiling 1) Fabric Type: Woven (100% Polyester), 2) Fabric GSM: 190 (minimum) 3) Tensile Strength: 500 N 4) Tearing Strength: 100 N 10. Colour: Bottle Green Note: 1. Outer tent means Cover/roof fabric & Inner tent means Side wall fabric. 2. All the necessary accessories required to fix-up the tent should be supplied with each tent.

This tender with title DDM/Tent/Dhaka/2022-2023/01 Tent Specification: 1. Composition: Outer Tent: High Strength 100% Polyester Woven Fabric,1000D x 1000D; (coated). Inner Tent: Super Strong Poly-Cotton (Polyester/Cotton blended fibers yarns). Cotton: 30% (±10), polyester: 70%(±10) Specific weight: 900 g/m2 minimum(outer tent); 320 g/m2 minimum(inner tent) Ground Sheet : Polyester PVC coated (100% waterproof) 2. Water vapor absorption: (Inner tent) Minimum 2000 g/ m²//24h. ISO 17229 3. Tensile strength (N) : Warp and Weft Minimum 1000(N) (Outer tent) Warp and Weft Minimum 850(N) (Inner tent) ISO-13934-1. 4. Rain penetration resistance/ water repellency/ spray test: (Outer & inner tent) Resistance to rain as per point 4.2.11 applying procedure as per 5.6 during 2h on one end and 3h on one side. 5. Frame: The metal structure of tent should be not less then 25mm in diameter, Thickness is not less than 0.8 mm 6. Fire Resistance/ retardancy: (Outer & inner tent) Should comply with CPAI-84, 1980 7. Tear resistance(N): Warp and weft 60N minimum (inner tent), Warp and weft 100N minimum (outer tent) ISO 9073-4 8. Size I) 10 Persons-4m x 3.6m x 2.2m (CH) x 1.7m (Wall Height) minimum 9. Tent Inner Ceiling 1) Fabric Type: Woven (100% Polyester), 2) Fabric GSM: 190 (minimum) 3) Tensile Strength: 500 N 4) Tearing Strength: 100 N 10. Colour: Bottle Green Note: 1. Outer tent means Cover/roof fabric & Inner tent means Side wall fabric. 2. All the necessary accessories required to fix-up the tent should be supplied with each tent. has been published on Bidding Source portal dated 10 Nov 2022 for the country of Bangladesh. It has been categorized on Woven fabrics of cotton & Tents & Raincoats & Roof frames & Primary-form of polyesters & Composition and purity testing and analysis services & Woven fabrics & Woven fabrics of metal thread. For similar tenders you can see tenders mentioned below of this page.