loader

World Tenders & Procurement Opportunities

Sl. No Description Of Goods Unit Quantity Required Remark 1. Die, BJ Clamping for Weatherford Iron Roughneck Model POWERARM 2.1 Positioning Device. Nos. 2. Dies for Weatherford 24-50 auto door back up tong. Nos. 40 3. Brake band for Weatherford 7.6-30 tubing tong Nos. 24 4. Magnate for Weatherford 24-50 casing tong Nos 6 5. 1" Hydraulic Hose 50 ft. long 3000 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing tong. Nos. 1 6. 1-1/4" Hydraulic Hose 50 ft. long 600 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing Tong Nos. 1 7. 1" Aeroquip Wing type Union set. 3000 psi or above wp with 1" NPT (mal & female) connection. Set 12 8. 1-1/4" Aeroquip Wing Type Union Set, 1000 psi or above wp with 1-1/4" NPT(mal & female) connection. Set. 12 9. 5" Drill Pipe Elevator Center Latch 350T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. No 2 10. 3 ½" Drill Pipe Elevator Center Latch 250T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. No 2 11. 2 3/8" Drill Pipe Elevator Center Latch 100T with 18 degree tapered shoulders,safety double latch system to reduce accidental opening. No 1 12. 5? DP Slips medium complete assembly 5? body with Inserts for 5? OD API Drill Pipe No 3 13. 3 ½" DP Slips medium complete assembly 3 ½ inc body with Inserts for 3 ½ OD API Drill Pipe No 2 14. 5? DP Slips Dies (5? body Varco) – 2167- 04 (180 Nos) Set 2 15. Bit sub 3-1/2 IF X 3-1/2 Reg. connection, Float Valve Bore in Reg. connection side. No. 3 16. X-O-S 3-1/2 IF Box X 3-1/2 Reg. pin connection No. 2 17. X-Over 4 1/2” IF box – 3 ½” IF pin No. 3 18. Bit sub 7 5/8 ” reg box – 7 5/8”reg box No. 2 19. Bit sub 6 5/8 ” reg box – 6 5/8”reg box with Float Valve Bore No. 2 20. Bit sub 4 ½” reg box – 4 ½” IF box, Float Valve Bore in Reg. connection side. No. 3 21. Light weight Lifting cap for 5 ?/ 4 ½ " Drill pipe, connection 4 1/2" IF No. 3 22. Lower Kelly Cock, 10000 psi wp, 6.62" OD × 3" ID , Length 22? High Torque Double Shoulder Compatible with API NC 50 (4 ½ IF) box up × pin down connection with metal to metal seal in ball seat and operating port complete with operating key. No. 2 23. 5"OD Threaded Cup Junk Sub / Boot Basket , Cup Length-30", 4-9/16" Cup ID, 1-1/2" Bore for operation in 6 to 6-3/8" Hole with 3-1/2" API Reg. Pin up × Box down connection. No. 3 24. 8-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 1 25. 8-1/4"OD Taper Mill (30 degree angle), Dressed with Crushed insert tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 1 26. 5-3/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 2 27. 5-3/4"OD Taper Mill (30 degree angle), Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 2 28. 4-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 2-3/8" API Reg. Pin connection. Bowen or equivalent. Nos 1 29. Foldable Runner Treadmill - 6.5HP Motor 0-22 Level Auto Incline - 'Dual Shock 10-Point Absorption System: Now with 'Bluetooth' and The Perfect Running Area: 140 x 48cm (1400 x 480mm), 15.6" LCD Display, Auto Incline, Bluetooth, German made Soft Drop System. DISPLAY: Watch videos on large 10-15.6 inch LCD touch screen display with Wi-Fi | AUDIO: Listen to music on Hi Fi speakers using USB pendrive or audio-in jack | PROGRAMS: 12 preset workout programs & manual mode for customized cardio exercise | PROGRAMS -- There are 12 Pre-Set programs P1-P12 to choose different workouts and manual mode settings of Speed, Distance, Time, Calories & Pulse for customized workouts FOLDABLE: The machine can folded in upright position when not in use. Hydraulic assist system lets you easily lift & lower the treadmill deck Foldable treadmill with cushioned 'Dual Shock 10-Point Absorption System'. Quality assurance & zero defect production rates. Branx Fitness excels in product quality & reliability. Superb 21km/h Max Speed (13mph). CE/ROHS/EN957 & ISO9001 Quality Control Certified & up to GS Standard. Maximumspeed:21kmph No. 3 30. Crystal XP2i digital Pressure gauge (0-15000 psi rated) with Data logger software No. 3 31. HP Laptop Intel Core i7 11th gen GeForce MX450 2GB Graphics 15.6" FHD Anti-glare 1165G7 Processor (12M Cache, 2.80 to 4.70 GHz) 8GB Ram +1TB HDD, or upgrade . No 4 32. Micromotion Coriolis Mass Flowmeter F300 series No. 1 33. Micromotion 2700 Multiple Variable Flow Transmitter with remote mounting No. 1 34. Micromotion Prolink III software No. 1 35. Nuflo Turbine 1502 Weco union liquid turbine meter or equivalent mounted on 2” cementing line with remote data acquisition system/software No. 1 36. 1502 Weco Hammer Union Pressure Transmitter- mounted on 2” cementing line (Rosemount/Viatran or equivalent, 0-15000 psi rated) with remote data acquisition system/software No. 1 For Cement Silo No. 37. 4” Butterfly Valve No. 10 38. 3” non-return Valve No. 5 39. 1” non-return valve No. 20 40. 4” discharge hose, 25-30 ft long c/w 4” opposite fig 100 hammer union male x female connection, WP= 150 psi No. 10 41. 3” air hose, 25-30 ft long c/w 3” opposite fig 100 hammer union male x female connection, WP= 150 psi No. 6 42. 1” rubber hose NPT connection 300 psi, 4 ft No. 25 43. 1” Tee No. 25 44. 1” socket No. 25 45. 1” nipple No. 25 46. 1” Air jet nipple with 1” aeration hose & 1” check valve No. 20

World Biggest Tenders Source

This tender with title Sl. No Description Of Goods Unit Quantity Required Remark 1. Die, BJ Clamping for Weatherford Iron Roughneck Model POWERARM 2.1 Positioning Device. Nos. 2. Dies for Weatherford 24-50 auto door back up tong. Nos. 40 3. Brake band for Weatherford 7.6-30 tubing tong Nos. 24 4. Magnate for Weatherford 24-50 casing tong Nos 6 5. 1" Hydraulic Hose 50 ft. long 3000 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing tong. Nos. 1 6. 1-1/4" Hydraulic Hose 50 ft. long 600 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing Tong Nos. 1 7. 1" Aeroquip Wing type Union set. 3000 psi or above wp with 1" NPT (mal & female) connection. Set 12 8. 1-1/4" Aeroquip Wing Type Union Set, 1000 psi or above wp with 1-1/4" NPT(mal & female) connection. Set. 12 9. 5" Drill Pipe Elevator Center Latch 350T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. No 2 10. 3 ½" Drill Pipe Elevator Center Latch 250T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. No 2 11. 2 3/8" Drill Pipe Elevator Center Latch 100T with 18 degree tapered shoulders,safety double latch system to reduce accidental opening. No 1 12. 5? DP Slips medium complete assembly 5? body with Inserts for 5? OD API Drill Pipe No 3 13. 3 ½" DP Slips medium complete assembly 3 ½ inc body with Inserts for 3 ½ OD API Drill Pipe No 2 14. 5? DP Slips Dies (5? body Varco) – 2167- 04 (180 Nos) Set 2 15. Bit sub 3-1/2 IF X 3-1/2 Reg. connection, Float Valve Bore in Reg. connection side. No. 3 16. X-O-S 3-1/2 IF Box X 3-1/2 Reg. pin connection No. 2 17. X-Over 4 1/2” IF box – 3 ½” IF pin No. 3 18. Bit sub 7 5/8 ” reg box – 7 5/8”reg box No. 2 19. Bit sub 6 5/8 ” reg box – 6 5/8”reg box with Float Valve Bore No. 2 20. Bit sub 4 ½” reg box – 4 ½” IF box, Float Valve Bore in Reg. connection side. No. 3 21. Light weight Lifting cap for 5 ?/ 4 ½ " Drill pipe, connection 4 1/2" IF No. 3 22. Lower Kelly Cock, 10000 psi wp, 6.62" OD × 3" ID , Length 22? High Torque Double Shoulder Compatible with API NC 50 (4 ½ IF) box up × pin down connection with metal to metal seal in ball seat and operating port complete with operating key. No. 2 23. 5"OD Threaded Cup Junk Sub / Boot Basket , Cup Length-30", 4-9/16" Cup ID, 1-1/2" Bore for operation in 6 to 6-3/8" Hole with 3-1/2" API Reg. Pin up × Box down connection. No. 3 24. 8-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 1 25. 8-1/4"OD Taper Mill (30 degree angle), Dressed with Crushed insert tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 1 26. 5-3/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 2 27. 5-3/4"OD Taper Mill (30 degree angle), Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 2 28. 4-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 2-3/8" API Reg. Pin connection. Bowen or equivalent. Nos 1 29. Foldable Runner Treadmill - 6.5HP Motor 0-22 Level Auto Incline - 'Dual Shock 10-Point Absorption System: Now with 'Bluetooth' and The Perfect Running Area: 140 x 48cm (1400 x 480mm), 15.6" LCD Display, Auto Incline, Bluetooth, German made Soft Drop System. DISPLAY: Watch videos on large 10-15.6 inch LCD touch screen display with Wi-Fi | AUDIO: Listen to music on Hi Fi speakers using USB pendrive or audio-in jack | PROGRAMS: 12 preset workout programs & manual mode for customized cardio exercise | PROGRAMS -- There are 12 Pre-Set programs P1-P12 to choose different workouts and manual mode settings of Speed, Distance, Time, Calories & Pulse for customized workouts FOLDABLE: The machine can folded in upright position when not in use. Hydraulic assist system lets you easily lift & lower the treadmill deck Foldable treadmill with cushioned 'Dual Shock 10-Point Absorption System'. Quality assurance & zero defect production rates. Branx Fitness excels in product quality & reliability. Superb 21km/h Max Speed (13mph). CE/ROHS/EN957 & ISO9001 Quality Control Certified & up to GS Standard. Maximumspeed:21kmph No. 3 30. Crystal XP2i digital Pressure gauge (0-15000 psi rated) with Data logger software No. 3 31. HP Laptop Intel Core i7 11th gen GeForce MX450 2GB Graphics 15.6" FHD Anti-glare 1165G7 Processor (12M Cache, 2.80 to 4.70 GHz) 8GB Ram +1TB HDD, or upgrade . No 4 32. Micromotion Coriolis Mass Flowmeter F300 series No. 1 33. Micromotion 2700 Multiple Variable Flow Transmitter with remote mounting No. 1 34. Micromotion Prolink III software No. 1 35. Nuflo Turbine 1502 Weco union liquid turbine meter or equivalent mounted on 2” cementing line with remote data acquisition system/software No. 1 36. 1502 Weco Hammer Union Pressure Transmitter- mounted on 2” cementing line (Rosemount/Viatran or equivalent, 0-15000 psi rated) with remote data acquisition system/software No. 1 For Cement Silo No. 37. 4” Butterfly Valve No. 10 38. 3” non-return Valve No. 5 39. 1” non-return valve No. 20 40. 4” discharge hose, 25-30 ft long c/w 4” opposite fig 100 hammer union male x female connection, WP= 150 psi No. 10 41. 3” air hose, 25-30 ft long c/w 3” opposite fig 100 hammer union male x female connection, WP= 150 psi No. 6 42. 1” rubber hose NPT connection 300 psi, 4 ft No. 25 43. 1” Tee No. 25 44. 1” socket No. 25 45. 1” nipple No. 25 46. 1” Air jet nipple with 1” aeration hose & 1” check valve No. 20 has been published on Bidding Source portal dated 30 May 2022 for the country of Bangladesh. It has been categorized on Lifting and handling equipment & Turbines and motors & Butterfly valves & Lifting and handling equipment and parts & Pressure gauges & Hoses & Oil platform equipment & Elevators and conveyors & Cement & Data equipment & Tungsten & Portable computers & Seats & Treadmills & Computer-related equipment & Doors & Touch screen monitors & Plugs and sockets & Audio-visual equipment & Television and audio-visual equipment & Brakes and brake parts & Tubing & Tungsten halogen filament lamps & Cushions & Industrial quality control services & Lighting equipment and electric lamps & Firefighting, rescue and safety equipment & Pipes & Casings & Non-return valves & Hammers & Jacks and vehicle hoists & Safety equipment & Software package and information systems & Casing and tubing & Speakers & Meters & Audio equipment accessories & Motion picture and video tape production and related services & Casing & Drilling equipment & Rubber boots & Data-acquisition system & Video equipment & Cementing work & Check valves & Silos & Oil-field machinery & Farming, hunting and fishing products & Parts of lifting and handling equipment & Iron roughnecks & Flowmeters & Control, safety or signalling equipment for port installations & Oil drilling equipment & Door screens & Drill bits & Turbine installations. For similar tenders you can see tenders mentioned below of this page.

General Information

Sl. No Description Of Goods Unit Quantity Required Remark 1. Die, BJ Clamping for Weatherford Iron Roughneck Model POWERARM 2.1 Positioning Device. Nos. 2. Dies for Weatherford 24-50 auto door back up tong. Nos. 40 3. Brake band for Weatherford 7.6-30 tubing tong Nos. 24 4. Magnate for Weatherford 24-50 casing tong Nos 6 5. 1" Hydraulic Hose 50 ft. long 3000 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing tong. Nos. 1 6. 1-1/4" Hydraulic Hose 50 ft. long 600 psi or above wp fitted with Aeroquip Wing Male both ends Union for use with Weatherford Casing Tong Nos. 1 7. 1" Aeroquip Wing type Union set. 3000 psi or above wp with 1" NPT (mal & female) connection. Set 12 8. 1-1/4" Aeroquip Wing Type Union Set, 1000 psi or above wp with 1-1/4" NPT(mal & female) connection. Set. 12 9. 5" Drill Pipe Elevator Center Latch 350T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. No 2 10. 3 ½" Drill Pipe Elevator Center Latch 250T with 18 degree tapered shoulders, safety double latch system to reduce accidental opening. No 2 11. 2 3/8" Drill Pipe Elevator Center Latch 100T with 18 degree tapered shoulders,safety double latch system to reduce accidental opening. No 1 12. 5? DP Slips medium complete assembly 5? body with Inserts for 5? OD API Drill Pipe No 3 13. 3 ½" DP Slips medium complete assembly 3 ½ inc body with Inserts for 3 ½ OD API Drill Pipe No 2 14. 5? DP Slips Dies (5? body Varco) – 2167- 04 (180 Nos) Set 2 15. Bit sub 3-1/2 IF X 3-1/2 Reg. connection, Float Valve Bore in Reg. connection side. No. 3 16. X-O-S 3-1/2 IF Box X 3-1/2 Reg. pin connection No. 2 17. X-Over 4 1/2” IF box – 3 ½” IF pin No. 3 18. Bit sub 7 5/8 ” reg box – 7 5/8”reg box No. 2 19. Bit sub 6 5/8 ” reg box – 6 5/8”reg box with Float Valve Bore No. 2 20. Bit sub 4 ½” reg box – 4 ½” IF box, Float Valve Bore in Reg. connection side. No. 3 21. Light weight Lifting cap for 5 ?/ 4 ½ " Drill pipe, connection 4 1/2" IF No. 3 22. Lower Kelly Cock, 10000 psi wp, 6.62" OD × 3" ID , Length 22? High Torque Double Shoulder Compatible with API NC 50 (4 ½ IF) box up × pin down connection with metal to metal seal in ball seat and operating port complete with operating key. No. 2 23. 5"OD Threaded Cup Junk Sub / Boot Basket , Cup Length-30", 4-9/16" Cup ID, 1-1/2" Bore for operation in 6 to 6-3/8" Hole with 3-1/2" API Reg. Pin up × Box down connection. No. 3 24. 8-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 1 25. 8-1/4"OD Taper Mill (30 degree angle), Dressed with Crushed insert tungsten carbide, with a 10" long integral fishing neck with wear pads with 4-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 1 26. 5-3/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 2 27. 5-3/4"OD Taper Mill (30 degree angle), Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 3-1/2" API Reg. Pin connection. Bowen or equivalent. Nos 2 28. 4-1/4"OD Flat Bottom Junk Mill, Dressed with Crushed sintred tungsten carbide, with a 10" long integral fishing neck with wear pads with 2-3/8" API Reg. Pin connection. Bowen or equivalent. Nos 1 29. Foldable Runner Treadmill - 6.5HP Motor 0-22 Level Auto Incline - 'Dual Shock 10-Point Absorption System: Now with 'Bluetooth' and The Perfect Running Area: 140 x 48cm (1400 x 480mm), 15.6" LCD Display, Auto Incline, Bluetooth, German made Soft Drop System. DISPLAY: Watch videos on large 10-15.6 inch LCD touch screen display with Wi-Fi | AUDIO: Listen to music on Hi Fi speakers using USB pendrive or audio-in jack | PROGRAMS: 12 preset workout programs & manual mode for customized cardio exercise | PROGRAMS -- There are 12 Pre-Set programs P1-P12 to choose different workouts and manual mode settings of Speed, Distance, Time, Calories & Pulse for customized workouts FOLDABLE: The machine can folded in upright position when not in use. Hydraulic assist system lets you easily lift & lower the treadmill deck Foldable treadmill with cushioned 'Dual Shock 10-Point Absorption System'. Quality assurance & zero defect production rates. Branx Fitness excels in product quality & reliability. Superb 21km/h Max Speed (13mph). CE/ROHS/EN957 & ISO9001 Quality Control Certified & up to GS Standard. Maximumspeed:21kmph No. 3 30. Crystal XP2i digital Pressure gauge (0-15000 psi rated) with Data logger software No. 3 31. HP Laptop Intel Core i7 11th gen GeForce MX450 2GB Graphics 15.6" FHD Anti-glare 1165G7 Processor (12M Cache, 2.80 to 4.70 GHz) 8GB Ram +1TB HDD, or upgrade . No 4 32. Micromotion Coriolis Mass Flowmeter F300 series No. 1 33. Micromotion 2700 Multiple Variable Flow Transmitter with remote mounting No. 1 34. Micromotion Prolink III software No. 1 35. Nuflo Turbine 1502 Weco union liquid turbine meter or equivalent mounted on 2” cementing line with remote data acquisition system/software No. 1 36. 1502 Weco Hammer Union Pressure Transmitter- mounted on 2” cementing line (Rosemount/Viatran or equivalent, 0-15000 psi rated) with remote data acquisition system/software No. 1 For Cement Silo No. 37. 4” Butterfly Valve No. 10 38. 3” non-return Valve No. 5 39. 1” non-return valve No. 20 40. 4” discharge hose, 25-30 ft long c/w 4” opposite fig 100 hammer union male x female connection, WP= 150 psi No. 10 41. 3” air hose, 25-30 ft long c/w 3” opposite fig 100 hammer union male x female connection, WP= 150 psi No. 6 42. 1” rubber hose NPT connection 300 psi, 4 ft No. 25 43. 1” Tee No. 25 44. 1” socket No. 25 45. 1” nipple No. 25 46. 1” Air jet nipple with 1” aeration hose & 1” check valve No. 20
Invitation to Tender
BAPEX/ADMIN/INT/TEN- 1112/2022
Bangladesh
30 May 2022
21 Jun 2022
English
Lifting and handling equipment , Turbines and motors , Butterfly valves , Lifting and handling equipment and parts , Pressure gauges , Hoses , Oil platform equipment , Elevators and conveyors , Cement , Data equipment , Tungsten , Portable computers , Seats , Treadmills , Computer-related equipment , Doors , Touch screen monitors , Plugs and sockets , Audio-visual equipment , Television and audio-visual equipment , Brakes and brake parts , Tubing , Tungsten halogen filament lamps , Cushions , Industrial quality control services , Lighting equipment and electric lamps , Firefighting, rescue and safety equipment , Pipes , Casings , Non-return valves , Hammers , Jacks and vehicle hoists , Safety equipment , Software package and information systems , Casing and tubing , Speakers , Meters , Audio equipment accessories , Motion picture and video tape production and related services , Casing , Drilling equipment , Rubber boots , Data-acquisition system , Video equipment , Cementing work , Check valves , Silos , Oil-field machinery , Farming, hunting and fishing products , Parts of lifting and handling equipment , Iron roughnecks , Flowmeters , Control, safety or signalling equipment for port installations , Oil drilling equipment , Door screens , Drill bits , Turbine installations

For viewing full details of tenders, you should Log in to your account. If not registered yet, Please Register Now

Or Request a call back now and one of our representatives will contact you. Contact us

Similar Tenders

Awarded - Procurement of Laptop Computers and Printers for Upazila Livestock Offices to establish LFFS - Bangladesh -- <b>Contract Value: BDT 59140060.93</b> Bangladesh Awarded - Supply and Installation of LED Wall Display for Rokton, Korobi and Multipurpose Hall and Digital Display Board for Hoimonti Auditorium and Multipurpose Hall (With Sound System and Video Conferencing System) - Bangladesh -- <b>Contract Value: BDT 14983988.18</b> Bangladesh Supplying of different types of electric bulbs, LED tube lights, security lights, garden light for different types of residential colony, rest houses, dormitory and office bhaban at Chattogram. - 27.11.1500.506.002.20(GS-3).24.799, Bangladesh Installation of garden light, LED light and pump motor supply along with installation of CCTV at Kurigram District Judge's residence. Under PWD Division , Kurigram. F.Y. 2024-25. - 27/kuri/APP/OTM/2024-25/EM Bangladesh Supply of different size GI Pipe (1, 1.5), Gate Valve (3/4), GI elbow (3/4), GI nipple (3/4, 1/2), socket (3/4, 1/2), GI Union (3/4), PVC low-down etc. at Departmental Store of Civil Constru… - Punibi-1/e-GP/OTM/SSW/2024-25/21 Bangladesh Supply Outdoor LED Flood Light at Madanganj & Sonargaon Grid Sub-station Under GMD Dhaka East, Power Grid. - 27.21.0000.650.07.001.24.1895; Bangladesh Supply, and Installation security and Compound Light at Chattogram BSTI Office under the Project of 'Establishment and Modernization of Regional Office of BSTI in Chattogram & Khulna (2nd Re… - BSTI/24-25/SD2/Compound light/W-2 Bangladesh Supplying of LED Flood Light for Different Grid Substations under GMD, Dhaka-South, Power Grid. - GMDDS:2024-2025/08 Bangladesh Procurement of Different types of outdoor light such as Round Bulb, Energy Saving Light (32W), LED Light (20W, 40W), LED Flood Light (50W, 100W, 150W, 200W, 300W, 400W etc.), Street Light (1… - 27.11.8436.425.04.084.24. 202; Bangladesh Supply, Fitting & Fixing of Street Light Pole, Bracket, Light Fixture etc. and Other Indoor Electrical Goods / Equipements for Repair & Maintenance Work at Emergency Basis (Term Contract) du… - 46.207.014.24.30.094.2024 Bangladesh
Lifting and handling equipment Tenders
Turbines and motors Tenders
Butterfly valves Tenders
Lifting and handling equipment and parts Tenders
Pressure gauges Tenders
Hoses Tenders
Oil platform equipment Tenders
Elevators and conveyors Tenders
Cement Tenders
Data equipment Tenders
Tungsten Tenders
Portable computers Tenders
Seats Tenders
Treadmills Tenders
Computer-related equipment Tenders
Doors Tenders
Touch screen monitors Tenders
Plugs and sockets Tenders
Audio-visual equipment Tenders
Television and audio-visual equipment Tenders
Brakes and brake parts Tenders
Tubing Tenders
Tungsten halogen filament lamps Tenders
Cushions Tenders
Industrial quality control services Tenders
Lighting equipment and electric lamps Tenders
Firefighting, rescue and safety equipment Tenders
Pipes Tenders
Casings Tenders
Non-return valves Tenders
Hammers Tenders
Jacks and vehicle hoists Tenders
Safety equipment Tenders
Software package and information systems Tenders
Casing and tubing Tenders
Speakers Tenders
Meters Tenders
Audio equipment accessories Tenders
Motion picture and video tape production and related services Tenders
Casing Tenders
Drilling equipment Tenders
Rubber boots Tenders
Data-acquisition system Tenders
Video equipment Tenders
Cementing work Tenders
Check valves Tenders
Silos Tenders
Oil-field machinery Tenders
Farming, hunting and fishing products Tenders
Parts of lifting and handling equipment Tenders
Iron roughnecks Tenders
Flowmeters Tenders
Control, safety or signalling equipment for port installations Tenders
Oil drilling equipment Tenders
Door screens Tenders
Drill bits Tenders
Turbine installations Tenders
Bangladesh Tenders
Asia Tenders
Tenders
No. 12, 1 st floor, Block B2, EGS Business Park, World Trade Center, Bakirkoy - Istanbul - Turkey
info@biddingsource.com
24 X 7 online support
TOP
For viewing latest tenders published for your business in all over the World: Sign in Join free
For accessing full details of Tenders, Kindly choose the Plan that works for you: View Subscription Plans